MOLLE - Full Panel Water Bottle Pocket (Black)

MOLLE - Full Panel Water Bottle Pocket (Black)

Made in USASCARS
Notify me when this product is back in stock.
Email:

Description

A secure, solid enclosure for a Nalgene style water bottle or other items needing quick and easy access. Designed to work with the MOLLE attachment system the Full Panel Water Bottle Pocket attaches to the side, front, or inside of our rucks.

 


SPECS

Availability Usually Ships in 3 to 5 Days
Rating Yes
Color Black
Materials 1000D CORDURA®
Manufacturer GORUCK
Made in USA Yes
Scars Lifetime Guarantee Yes

Measurements

Weight 0.300 lbs
Length 12.000 in
Width 9.000 in
Height 1.000 in
MOLLE - Full Panel Water Bottle Pocket (Black) is rated 4.583333333333333 out of 5 by 12.
Rated 5 out of 5 by from Useful I put my 1L Camelbak Eddy bottle in this and then put it inside my GR1. I don't want things all over my backpack (which is why I bought the ruck I did, and not an SOC or Mystery Ranch). I put ice in my bottle and this pocket keeps condensation from soaking my books and such, it does tend to feel a little humid on the outside though. I leave the strap loose, but can cinch it down 1/2 to 2/3 the length of the strap. In the pictures you can see there is a lot of room left around my Camelbak. My husband's a Monster addict, so that's what we have around the house, no canned beer. The lidded one is a 3 serving 24oz can, it has a larger diameter than a standard can. I can just fit two 2 serving 16oz cans in there; you may be able to finagle four 12oz beers in it.
Date published: 2016-09-24
Rated 5 out of 5 by from Functions Well I bought two of these to go on either side of a GR1 21L. Ended up using one on the front of the bag with the field pouch and it works pretty well. I put the other one in the top of the main compartment over my books and use it as a lunch bag. Only complaint is that it has room to connect to a 4 layer molle webbing, while the pack only has three, so it is not as secure on the pack and there is a little too much movement for my liking. However, that is an issue with compatibility, not a design flaw as this product is great! I would highly recommend.
Date published: 2016-08-20
Rated 4 out of 5 by from Hard to remove nalgene bottle from inside It's GoRuck, so obviously incredible material is used to create this Bottle Holder. The Molle attachment is nice and easy to figure out. I'm used to the clips on the bottom of Molle's and was intrigued of the tips being only "tucked" underneath the bottom little sheath thing. The only downfall (why the 3 stars), is that when you unclip the top pull the top portion back, it's very difficult to remove a 1qt Nalgene bottle. I mean, in the grand scheme of things it's NOT difficult to remove it, but I personally require two hands to do this. For example, you can't really take the bottle of this case on the side of your GR1 while you're driving with one hand. But great material and definitely helps keep in tact whatever surface you have your cold water bottle sitting on top of by protecting it from "bleeding" the condensation...
Date published: 2016-07-19
Rated 4 out of 5 by from Typical Goruck Quality Built like you could take a grenade, pull the pin, and lock it inside the pocket and when it went off, nothing would happen. Maybe some smoke would leak out. Bombproof. Another quality Goruck product. Only 4 stars due to flap being somewhat difficult to fully open while on your back. Have a friend grab you bottle or take off ruck for easier access.
Date published: 2016-07-16
  • 2016-09-30T10:31CST
  • bvseo_cps, prod_bvrr, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_12
  • loc_en_US, sid_GEAR-000141, PRD, sort_relevancy
  • clientName_goruck