Everything you need to get started on your next day ruck. Just add weight.

 Bullet Ruck

We build a lot of rucks (like GR1) that hold all the weight. The Bullet Ruck is simpler and more streamlined. So, while its stress points are also proven at up to 400 lbs, we recommend a Ruck Plate  and some water.

Sizing: Due to its streamlined build, the Bullet Ruck works for all shapes and sizes. Check out the Ruck Plate Compatibility here.

PRIMARY FEATURES

Streamlined Design

Single compartment with 3 interior pockets, including one for your 20 LB Ruck Plate.

Silent Zipper Pulls

YKK Zippers with pulls constructed from 550 paracord are the only zippers you should ever trust. We use the best on the market. We also hate the annoying sound of zipper heads hitting each other over and over again while we’re on the move. Don’t you?

Molle Attachments

3 rows of external MOLLE webbing sized to fit a GR1 Field pocket and other MOLLE friendly accessories, like badass Carabiners (yes, they make the Bullet Ruck even tougher).

Rainproof

By military-spec submersion tests, waterproof means you could repeatedly submerge something and its contents would stay entirely dry. Our rucks are highly water resistant aka rainproof.

Interior D-Ring

Clip your hydration bladder in with a carabiner and allow gravity to do its job.

2" x 3" VELCRO

Allows you to customize your Bullet with the patch of your choice.

Padded Straps

Foam in the straps is a combo of lower density foam (softer) laminated to higher density foam (harder). The lower density is against the wearer's body for additional comfort. Note: Straps are ½” thick, 2 ½” wide vs GR1’s, which are ⅝” thick and 2 ¾” wide.

Padded Back Panel

For additional comfort next to your back.

Opens Flat

Easy to pack and organize. Special Forces medical rucks share a similar design.

Ruck Plate Compatible

The 10L fits the 20 LB Standart Ruck Plate perfectly because we designed the Bullet’s interior around it. Expert Plates (20 LB and 30 LB) and the 30 LB Ruck Plate will only fit in the 15L. Check out the Ruck Plate integration guide here.

Hydration Port

Exit port for hydration bladder tube is found under the top handle of the ruck.

Padded Top Handle

Extra padded and reinforced for abuse through any workout.

Streamlined Design

Single compartment with 3 interior pockets, including one for your 20 LB Ruck Plate.

Silent Zipper Pulls

YKK zippers with silent, glove friendly zipper pulls constructed from parachute 550 cord.

MOLLE Attachments

3 rows of external MOLLE webbing let you customize your Bullet how you want.

Rainproof

Our rucks are highly water resistant aka rainproof.

Ruck Plates

Perfect for rucking, the Bullet features an interior plate pocket. Check out the Ruck Plate integration guide here.

Extra Padded Straps

Shoulder straps are extra padded to carry loads more comfortably.

Opens Flat

Easy to pack and organize. Special Forces medical rucks share a similar design.

Padded Back Panel

For additional comfort next to your back.

Interior D-ring

Clip your hydration bladder in with a carabiner and allow gravity to do its job.

Hydration Port

Exit port for hydration bladder tube is found at the top of the ruck.

2" x 3" VELCRO

Allows you to customize your Echo with the patch of your choice.

Padded Top Panel

Extra padded and reinforced for abuse through any workout.

Special Forces Grade Materials

The materials we choose are proven to thrive in war. YKK Zippers perform despite Middle East sandstorms, and 1000 denier Cordura^® is the preferred material for Special Forces rucks due to its strength to weight ratio and durability.

Badass American Construction

High stress points are strength tested at over 400 lbs. The Bullet Ruck is capable of holding more weight than any human should ruck with and we recommend a 20 LB Ruck Plate and the essentials.

Special Forces Grade Materials

The materials we choose are proven to thrive in war. YKK Zippers perform despite Middle East sandstorms, and 1000 denier CORDURA® is the preferred material for Special Forces rucks due to its strength to weight ratio and durability.

Badass American Construction

High stress points are strength tested at over 400 lbs. The Bullet Ruck is capable of holding more weight than any human should ruck with and we recommend a 20 LB Ruck Plate and the essentials.

The Bullet Ruck is recommended with the following Ruck Plates:

10 LB Ruck Plate

Recommended in the plate pocket.

---

20 LB Standard Ruck Plate

Fits in both rucks. The plate is secure in the 10L and will not shift, but has more room in the 15L and may shift from side to side — to make it more secure, wrap the Ruck Plate in a t-shirt or something to prevent it from shifting around.

---

20 LB Expert Ruck Plate

Does not fit in the 10L plate pocket, but does fit in the 15L.

---

30 LB Standard Ruck Plate

Does not fit in the 10L plate pocket, but does fit in the 15L.

---

30 LB Expert Ruck Plate

Does not fit in the 10L plate pocket, but does fit in the 15L.

Carabiner

Climbing (CE) Certified with laser etched GORUCK logo. Attach to the MOLLE on your ruck to make it look more badass. Use it to rappel and/or attach Training Sandbags together when necessary.

The ISO Cold Forging process provides an extraordinary strength to weight ratio, making this versatile 'biner a lightweight addition to your ruck.

• Laser etched GORUCK logo
• One of the strongest aluminum carabiners in the world with a major-axis strength of 31kN
• Classic D shape carriers the loads off-center, toward stronger, non-gated side
• Hooded gates offer smooth rope-bearing surfaces
• Tapered nose for increases strength and spin rivets for smooth snag-free gate surfaces
• CE certified
• Made in USA

Hydration Bladder

Source hydration systems have not only undergone GORUCK Challenges; they have been tried, tested, and recommended by Special Forces soldiers in war. They are tough, easy to clean, and perfectly compatible with our rucksacks; this is our choice for hydration on the move.

• WXP Storm Hydration System 3L
• Can be attached via MOLLE and carabiner
• Patented slide closure for airtight seal if closed, and easy draining and cleaning through top opening when opened
• Antimicrobial technology blocks bacterial growth for the life of the system and eliminates the need of frequent cleaning
• No-bite push-pull valve with an integrated shut-off mechanism and protective cover to block dirt and grime from mouthpiece
• Angled Valve- Turns 360 degrees for perfect valve/mouth orientation. Allows tube to be 25cm shorter. Less excess tube bouncing around on the chest
• Cool Weave Tube Cover protects tube from damage, while keeping the liquid cool and blocking UV-light
• Quick connect hose fitting allows the tube to be disconnected without spilling, and is compatible with most filtration systems and accessories
• Integral Refill Handle allows for fast and easy refill with no spills

Reflective Ruck Bands

These reflective leg bands are made in the USA of the highly visible Reflexite® material so you can stay seen on the road, path, or trail when you're out on a morning or an evening ruck. Strap these through the external MOLLE on your ruck or wherever you need to have maximum reflective visibility and stay safe out there.

• Up to 1200 feet of nighttime visibility
• 360 degree reflective coverage
• 14" with 1.5" wide double striped both front and back
• Adjustable hook & loop fastening system
• Made in USA

Reverse Flag Patch

Quality embroidered 2" x 3" patch with VELCRO® "hook" backing. Perfect for customizing your GORUCK bags, rucks, TAC Hats, and more.