Built for Rucking

Purpose built for rucking and rucksack training. If you train hard on dirt, grass, and concrete, Rucker is the tool for you to get stronger one rep and one mile at a time.

The Rucker® is now upgraded to make it even easier to maintain your equipment. Gravity + USA Cast Iron Ruck Plate + Concrete = too many zipper failures. We can’t build better zippers to withstand this. Nobody can. So, we replaced the interior zippers with velcro and removed the front exterior zipper pocket.

It is the most comfortable rucksack ever built with upgraded padding on the top of the plate pocket for bear crawls. It also has ergonomic lumbar support and the fabric on the back panel and underside of straps does not cause friction burn.

Features

Lumbar padding supports the natural curve of your back
Hi-vis reflective stripe across the front for safety
4 padded handles: top, bottom, and both sides
3 rows of external MOLLE webbing on the front and side let you customize your ruck, like adding a Padded Hip Belt
Frame Sheet supports the integrity of the pack as you weigh it down and allows you to carry a heavier load more comfortably
Interior d-ring and hydration tube exit port under the top handle of the ruck
YKK zippers with silent, glove friendly zipper pulls constructed from parachute 550 cord
Opens flat so it's easy to pack and organize. Special Forces medical rucks share a similar design.
Ruck Plate® compatible
20L: 2 Velcro mesh pockets & Velcro Ruck Plate Pocket
25L: 2 Velcro mesh pockets, 2 Ruck Plate Pockets
Highly water resistant aka rainproof
Bottom grommet drain holes
Shoulder straps are extra padded to carry heavier loads more comfortably
Includes adjustable and removable Training Sternum Strap
2"x3" hook and loop on the front panel to customize with the patch of your choice
Additional 2"x3" hook and loop patch panel on the Ruck Plate® pocket

Specs + Materials

Primary Material - 1000D CORDURA®. Note: All colorways are 1000D CORDURA with the exception of Tropic Multicam, which is primarily 500D Cordura
Back Panel & Shoulder Strap Underside Material: 210D HT (High Tenacity) CORDURA®
Lumbar Support: 10MM EVA Foam Padding
Dimensions: 12"W x 20"H x 6.75"D
Main Ruck Plate® Pocket Dimensions: 9.75" x 15.5"
2nd Ruck Plate® Pocket Dimensions: 9.5"W x 11.75"H
Shoulder Straps: 16.5"L x 5/8"W
Internal Mesh Pocket: 12"W x 13"H
Internal CORDURA® Pocket: 11"W x 6.5"H
Sternum Strap: 17" - 7.5"L x 1"W
Reflective Stripe: 300 cd/lux m²

Ruck Plate Compatibility

The 25L Rucker® has been purpose-built for weighted PT and to be the best rucking backpack ever built. It has an elevated Ruck Plate® pocket that will securely fit a 10LB Ruck Plate, or a 20LB / 30LB (Standard) Ruck Plate®.

The 25L Rucker® features two (2) Ruck Plate® pockets and can securely fit up to 75 lbs of plates utilizing one (1) 45LB Ruck Plate® (primary pocket) and one (1) 20LB or 30LB (Standard) Ruck Plate® (secondary pocket).

Note: If you need more than 75 lbs (good on you) there’s plenty of room for a Filler Bag in the main rucksack compartment or you can always add a Sandbag for even more fun.

45LB Ruck Plates® only strap in securely to the 25L.