Built for Rucking

Purpose built for long range Rucking & Rucking Events like GORUCK Selection and other endurance events. You have a heavy pack out and you move out for miles and miles on end and you want the most comfortable rucksack ever built on your back.

The Rucker Long Range has padded straps and the fabric used on the back panel and underside of the shoulder straps will not cause friction burn. You can even wear it shirtless and it plays well with delicate fabrics like Merino. There is also Lumbar Support via an additional 10mm of EVA foam padding along the bottom section of the back panel that supports the natural curve of your back. It’s raised up, protects you from friction from seams on pants or belts. And if it’s exposed to your skin, that’s no problem either.

With 2 large compartments and multiple pockets, there is plenty of room for supplies and you can keep everything in its place.

Available in 33L or 39L. All 33L and 39L Ruckers come with a Training Sternum Strap.

Features

Lumbar padding supports the natural curve of your back
Hi-vis reflective stripe across the front for safety
4 padded handles: top, bottom, and both sides
3 rows of external MOLLE webbing on the front and side let you customize your ruck, like adding a Padded Hip Belt
Frame Sheet supports the integrity of the pack as you weigh it down and allows you to carry a heavier load more comfortably
Interior d-ring and hydration tube exit port under the top handle of the ruck
YKK zippers with silent, glove friendly zipper pulls constructed from parachute 550 cord
Opens flat so it's easy to pack and organize. Special Forces medical rucks share a similar design.
Ruck Plate® compatible
Shoulder straps are extra padded to carry heavier loads more comfortably
Main compartment: 2 zippered mesh pockets and 2 Ruck Plate Pockets
Outer compartment: 2 zippered mesh pockets, 1 smaller zippered pocket and built-in field pocket
External slant pocket provides quick access to small items
Highly water resistant aka rainproof
Bottom grommet drain holes
Includes adjustable and removable Training Sternum Strap
2"x3" hook and loop on the front panel to customize with the patch of your choice
Additional 2"x3" hook and loop patch panel on the Ruck Plate® pocket

Specs + Materials

Primary Material: 1000D CORDURA®
Back Panel & Shoulder Strap Underside Material: 210D HT (High Tenacity) CORDURA®
Lumbar Support: 10MM EVA Foam Padding
33L Dimensions: 12.5"W x 20.5"H x 9"D
33L Main Ruck Plate® Pocket Dimensions: 9.75" x 15.5"
33L Lower Ruck Plate® Pocket Dimensions: 9.5"W x 11.75"H
33L External Slant Pocket: 11.5"W x 12"H
33L Internal Mesh Pocket: 12"W x 13"H
33L Internal CORDURA® Pocket: 11"W x 6.5"H
39L Dimensions: 12.5"W x 22”H x 9”D
39L Main Ruck Plate® Pocket Dimensions: 9.75" x 15.5"
39L Lower Ruck Plate® Pocket Dimensions: 9.5"W x 11.75"H
39L External Slant Pocket: 11.5"W x 12"H
39L Internal Mesh Pocket: 12"W x 13"H
39L Internal CORDURA® Pocket: 11"W x 6.5"H
Sternum Strap: 17" - 7.5"L x 1"W
Reflective Stripe: 300 cd/lux m²

Ruck Plate Compatibility

The Rucker® has been purpose-built for weighted PT and to be the best rucking backpack ever built.

The 33L and 39L Rucker® feature two (2) Ruck Plate® pockets, one that holds 20LB or 30LB Ruck Plates for Rucker and one that holds a 45LB Plate, 20LB (GR1), 30LB (GR1). It can securely fit up to 75 lbs of plates utilizing one (1) 45LB Ruck Plate® (primary pocket) and one (1) 20LB or 30LB Ruck Plate® (secondary pocket).

Note: If you need more than 75 lbs (good on you) there’s plenty of room for a Filler Bag in the main rucksack compartment or you can always add a Sandbag for even more fun.